Butterfly Valve

Product Details:

Llug concentric butterfly valve features a cartridge type seat, streamlined disc and strong stem-to-disc connection for easy use in many industrial applications such as food and beverage, pulp and paper, chemical, mining, water treatment, power plants, etc. Full rated unidirectional dead-end service is achieved by a lip designed in the lug body.

FEATURES

1,ISO5211 top flange together with stem square suitable for direct mounting of actuators
2,Stem anti-blowout design keep safety in field use
3,Dirtscraper prevents moisture penetrating into the shaft area
4,Suitable for high pressure and full vacuum service due to the use of a cartridge seat design
5,Full rated unidirectional dead-end service is achieved by a lip designed in the lug body
6,No exposed pins or bolts for stem-to-disc connection
7,No need for flange gaskets
8,No risk of damage to the valve during installation in closed position
9,Bubble-tight shut of at full pressure rating
10,Large flow capacity and enough strength because of streamline disc design
11,Plug with O-ring sealing eliminates any leakage from the stem

Product Details:

Centred-disc butterfly valve, sealed by elastomer liner, with lever or manual gearbox, pneumatic, electric or hydraulic actuator. Semi-lug body (T2), full-lug body (T4) or U-section body with flat faces (T5). 
Benefits

• Spherically machined disc with rounded sealing contour
• ensures durable and permanently tight shut-off
• Splined or keyed connection without play between shaft and valve disc
• Dry shaft, no contact with fluid handled
• Sealing to atmosphere is ensured,
• even when the actuator has been removed
• Marking indicates position of valve disc
• Valve equipped with stainless steel bearing bushes with reinforced PTFE coating
• Valve actuation options
• Manual
• Electric
• Pneumatic
• Hydraulic

Technical Data

• Nominal pressurePN 10, PN 16
• Max. nominal sizeDN 1000
• Max. allowed fluid temperature200 °C

Product Details:

Wafer type butterfly valves for industries all over india with IBR and EIL certification is available here.

Product Details:

We are engaged in manufacturing with excellent quality of Wafer Type Cast Iron Butterfly Valve. Racer Valves Pvt Ltd is involved in manufacturing and supplying of international quality standard Wafer Type Butterfly Valve. These valves are widely demanded in the market owing to their smooth functioning. We source and supply a quality range of Butterfly Valves that is designed to stop or slow air or product flow by means of a turning disk. Further, these can be used in gravity flow or pneumatic systems, and can have manual or pneumatic actuators. We use very sophisticated techniques while manufacturing these products so that the total performance is guaranteed. Available in various specifications, these Butterfly Valves can also be custom made as per the clients specific requirements.

Product Details:

Centred-disc butterfly valve, sealed by elastomer liner, with lever or manual gearbox, pneumatic, electric or hydraulic actuator. Semi-lug body (T2), full-lug body (T4) or U-section body with flat faces (T5). Body types T2, T4 and T5 are suitable for downstream dismantling and dead-end service with counterflange. Connections to EN, ASME.

Benefits

• Spherically machined disc with rounded sealing contour
• ensures durable and permanently tight shut-off
• Splined or keyed connection without play between shaft and valve disc
• Dry shaft, no contact with fluid handled
• Sealing to atmosphere is ensured,
• even when the actuator has been removed
• Marking indicates position of valve disc
• Valve equipped with stainless steel bearing bushes with reinforced PTFE coating
• Valve actuation options
• Manual
• Electric
• Pneumatic
• Hydraulic

Technical Data

• Nominal pressurePN 10, PN 16
• Max. nominal sizeDN 1000
• Max. allowed fluid temperature200 °C

Product Details:

Zoloto Butterfly Valves are best in class, easy to install and easy to use- On -Off application valves for low pressures

Product Details:

Centred-disc butterfly valve, sealed by elastomer liner, with lever or manual gearbox, pneumatic, electric or hydraulic actuator. Semi-lug body (T2), full-lug body (T4) or U-section body with flat faces (T5). 
Benefits

• Spherically machined disc with rounded sealing contour
• ensures durable and permanently tight shut-off
• Splined or keyed connection without play between shaft and valve disc
• Dry shaft, no contact with fluid handled
• Sealing to atmosphere is ensured,
• even when the actuator has been removed
• Marking indicates position of valve disc
• Valve equipped with stainless steel bearing bushes with reinforced PTFE coating
• Valve actuation options
• Manual
• Electric
• Pneumatic
• Hydraulic

Technical Data

• Nominal pressurePN 10, PN 16
• Max. nominal sizeDN 1000
• Max. allowed fluid temperature200 °C

Product Details:

Product Details:

Beyond Standards :

·         Design complies to API 609

·         Valves offered with API 609 monogram

·         Wide portfolio of Short-pattern and Long-pattern valves

·         Design Validation Test - 12” Class 150 valve successfully completed 10,000 cycles

·         Fugitive emissions - Complies to ISO 15848-1 Endurance Class CO2 and Tightness class AH

·         Fire safe by design and complies to API 607/ ISO 10497 (preferred and non-preferred direction)

·         API RP 591 test conducted on 12” Class 150 TOBV at Element Lab, USA

·         CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Annexure III, Module H

·         PED Module B1 Design examination certificate (certified by DNV) available

·         Atex - Meets requirements of Atex Directive 94/9/EC (ATEX), category 2 non-electrical equipment

·         SIL3 Safety Integrity Level to IEC 61508

Additional Information:

• Delivery Time: 10 weeks

Product Details:

Design▪ Wafer-type body with flat faces - T1: DN 40 - 1000▪ Semi-lug body - T2: DN 40 - 600▪ Full-lug body with flat faces - T3: DN 40 - 600▪ Full-lug body with raised faces - T4: DN 40 - 600▪ Flanged body with flat faces - T5: DN 650 to 1000 (DN 150to 600 on request)▪ Downstream dismantling possible with body types T2, T3,T4 and T5▪ Dead-end service with counterflange possible with allbody types▪ Body with polyurethane coating, thickness 80 µm, colour:RAL 5002, blue▪ Valve disc made of nodular cast iron, epoxy-coated,thickness 80 μm, colour: RAL 8012, brown▪ Plug on valve bottom, blue RAL 5002▪ Design to EN 593 and ISO 10631▪ Top flange and square valve shaft end to ISO 5211▪ Marking in accordance with EN 19▪ Absolutely tight shut-off in either direction of flow inaccordance with EN 12266-1, leakage rate A, and ISO 5208,category A.▪ EN, ASME, JIS, AWWA connections possible.▪ Face-to-face length to ISO 5752-20 and EN 558-1-20Variants▪ Butterfly valve cleaned and packaged, free from paintwetting impairment substances▪ Quarter-turn levers of the S+ / SR+ / SP+ / CR+ / CM+ typeseries▪ MA+ manual gearbox▪ MS / MC manual gearboxes▪ Electric quarter-turn actuators▪ Electric multi-turn actuators▪ ACTAIR EVO / DYNACTAIR EVO pneumatic actuators▪ HQ hydraulic actuators▪ AMTROBOX for open/closed position signalling▪ AMTRONIC U on/off control unit▪ SMARTRONIC U positioner▪ Anti-static design for manually actuated valves




Product informationProduct information as per Pressure EquipmentDirective 2014/68/EU (PED)The valves satisfy the safety requirements of Annex I of theEuropean Pressure Equipment Directive 2014/68/EU (PED) forfluids in Groups 1 and 2.Product information as per UK Pressure Equipment(Safety) Regulations 2016The valves satisfy the safety requirements of the UK PressureEquipment (Safety) Regulations 2016 (PER) for fluids in Groups1 and 2.EC Machinery Directive 2006/42/ECValves with actuators can meet the requirements of the2006/42/EC Machinery Directive for partly completedmachinery.Product information as per Regulation No.1907/2006 (REACH)For information as per European chemicals regulation (EC) No.1907/2006 (REACH) see https://www.ksb.com/en-global/company/corporate-responsibility/reach.Product information as per Directive 2014/34/EU (ATEX)The valves do not have a potential internal source of ignitionand can be used in potentially explosive atmospheres, Group II,category 2 (zones 1+21) to ATEX 2014/34/EU.CertificationsTable 3: OverviewLabel Effective in: CommentWorldwide -Germany Approved in accordance with theGerman drinking water regulationSwitzerland Approved in accordance with Swissdrinking water regulationBelgium Approved in accordance with theBelgian drinking water regulationUnitedKingdomApproved in accordance with the UKdrinking water regulationFrance Approved in accordance with theFrench drinking water regulationWorldwide Elastomeric parts meet FDAstandards.Worldwide Approved for marine applicationsWorldwide Approved for marine applicationsNF RobGazFrance Approved for gas applicationsGermany Approved for gas applicationsEurope Certificate regarding food contactmaterials as per EuropeanRegulation (EC) No. 1935/2004Related documentsTable 4: Information/documentsDocument Reference numberOperating manual 8449.8Purchase order specifications1. Type2. Nominal pressure3. Nominal size4. Fluid handled5. Flow rate / flow velocity6. Operating temperature7. Materials (body, valve disc, seat)8. Line connection, flange facing and flange surface quality9. Actuator / automation10. Reference number

Additional Information:

• Production Capacity: 10000
• Delivery Time: 8 WEEKS

Product Details: